| |
|
|
|
| |
Watermate
Accessories |
|
| |
You can add to your
Watermate system with the following accessories. |
|
| |
 |
Rainwater
Diverters
Make the most of your Watermate system by ensuring you always have
a full water butt! By fitting a rainwater diverter into your
downspout, you can direct the water to automatically fill your
water butt so that it is always available when your Watermate
system is in operation.
Featuring an on/off lever that allows easy cleaning and an
automatic overflow system to make your system completely
maintenance-free. Suitable for down-pipes 68mm round or 65mm
square. We will e-mail you to find out which colour (White, Black, Brown or Grey) you would prefer.
£14.99 |
|
| |
 |
Diverter-Filter
This rainwater diverter has a built-in filter to prevent leaves
and debris entering your water butt. Fits downpipes up to 100mm.
£42 |
|
| |
 |
Water Butt Tap
This
water butt tap has a narrow outlet which allows you to push on a 1/2"
hose or the 13mm supply hose from ourselves. This will connect the soft
rain gravity flow kit and soaker dripline kit to your water butt or to
the timer with adaptor fittings.
£3.00 |
|
| |
 |
Butt Tap
Click-Connector A
sturdy butt tap with an easy-twist tap. The click-connector outlet
allows a hosepipe to be connected using a standard Hozelock fitting.
The timers can be fitted directly onto the the thread on the tap for a
very secure fit. Fits standard 3/4" water butt opening.
£5.99
|
|
| |
 |
Water Butt
Connectors
If
you wish to store more water to keep your Watermate supplied for
an extended period of time, or are watering a particularly large
area, it is possible to simply and easily connect a pair of water
butts with our handy kit. Supplied with two connectors and
joining tube (approx. 30cm). To ensure access to all the
water, join the barrels at the base to make them self-levelling.
£4.00 |
|
| |
 |
Electronic
Timer
The
Grasslin electronic timer is supplied with all our Watermate kits,
but is also available to purchase separately. Can be set to
operate up to 10 times per day at intervals as low as one minute,
offering complete flexibility over irrigation times.
Easy-to-set and highly reliable.
£22 |
|
| |
|
Impeller
If
you run your pump without water this will cause the impeller to
melt. (We also recommend replacing the rotor seal - see
below) We can supply a replacement impeller for all original Watermate pumps
with a serial number higher than 003617. For pumps with a lower
serial number please
contact us for advice.
£4 |
|
|
|
| |
|
Rotor Seal
The
seal can be damaged when the original Watermate pump is run dry. To replace it:
remove the old one located on the motor shaft, check pump housing
is not damaged and refit the new rotor seal before you fit the
impeller which is held in place with a circlip. Please call
for advice or assistance.
£4 |
|
|
|
